V-Belt Pulleys · ISO 4183 & DIN 2211

European V-Belt Pulleys from MISHKIN

Two shaft-mounting systems, one European standard: Taper-Bush V-belt pulleys (MK-TBP) for rapid assembly without re-machining, and Pilot-Bore V-belt pulleys (MK-PBP) ready for custom finish boring. CNC-machined from EN-GJL-200/250 pearlitic cast iron and solid C45E steel with manganese phosphate protection.

Compatible with Narrow V-belts (SPZ, SPA, SPB, SPC / XPZ, XPA, XPB, XPC) and Classical V-belts (Z, A, B, C) · Static balanced to ISO 21940-11 Grade G16 (Vp ≤ 35 m/s).

4 ProfilesSPZ · SPA · SPB · SPC
1 – 12Grooves Available
1,862Standard Models
European V-belt pulleys family — MISHKIN MK-TBP taper-bush pulleys, taper bush, and MK-PBP pilot-bore pulleys
02

Pilot-Bore V-Belt Pulleys (MK-PBP Series)

DIN 2211-1 & ISO 4183 · Solid hub with ISO H9 pilot bore ready for custom finish boring

Also in the range MK-TB Taper Bushes (1008–5050) & In-House Custom Machining — Standard metric/inch taper bushes, custom finish boring to ISO H7 with DIN 6885-1 (JS9) keyways and set screws, 2-plane G6.3 dynamic balancing, and EN-GJS-400-15 ductile iron or all-steel specials. Need shaft protection or flexible drive connections too? See our Torque Limiters and Industrial Couplings. Request custom machining →
03

Technical Standards & Groove Reference

ISO 4183 · DIN 2211-1 / DIN 2211-3 · EN 1561 · ISO 21940-11

ISO 4183 and DIN 2211-1 V-belt pulley groove cross-section geometry diagram
Groove Profile Geometry (ISO 4183 / DIN 2211-1)
P (dw) = Datum / Pitch Diameter · O (da) = P + 2f
Total rim face width for z grooves: F / B = (z − 1)·d + 2e
Profile Compatible V-Belts Datum bd Top a Pitch d (e) Min. ∅P α = 34° α = 38°
SPZ SPZ, XPZ (3V), Z (10) 8.5 mm 9.7 mm 12.0 ± 0.3 mm 50 mm (45 PB) P ≤ 80 mm P > 80 mm
SPA SPA, XPA, A (13) 11.0 mm 12.7 mm 15.0 ± 0.3 mm 63 mm (50 PB) P ≤ 118 mm P > 118 mm
SPB SPB, XPB (5V), B (17) 14.0 mm 16.3 mm 19.0 ± 0.4 mm 80 mm (71 PB) P ≤ 190 mm P > 190 mm
SPC SPC, XPC, C (22) 19.0 mm 22.0 mm 25.5 ± 0.5 mm 160 mm (100 PB) P ≤ 315 mm P > 315 mm
Engineering Note (Multi-Groove Drives, z ≥ 2): Grooves conform to DIN 2211-1 (α tolerance ±0.5°) and accept both Narrow V-Belts (DIN 7753-1 / ISO 4184) and Classical V-Belts (DIN 2215). Always install matched-length belt sets (ISO 4184 L=L / Match-Free) for uniform load distribution across grooves.
Materials & Surface

EN-GJL-200/250 Cast Iron & C45E Steel

Standard pulleys are cast in pearlitic grey cast iron EN-GJL-200 / EN-GJL-250 (EN 1561, 180–220 HB). Small-diameter items marked * are CNC-turned from solid C45E steel (EN 1.1191) to preserve hub wall strength. All surfaces receive micro-crystalline manganese phosphate treatment (EN ISO 9717).

Balancing & Speed Limits

ISO 21940-11 Grade G16 / G6.3

Every pulley is statically balanced to Grade G16 for peripheral speeds up to Vp ≤ 35 m/s (rpmmax = 668,450 / P). For 30 < Vp ≤ 35 m/s or high-rpm fan drives, we supply 2-plane dynamic balancing to Grade G6.3. Groove runout meets DIN 2211-1 (tR, tA ≤ 0.0005·P + 0.10 mm).

Ordering Nomenclature

How to Read MISHKIN Codes

  • *MK-SPZ 50-01Taper-Bush pulley: * = C45E steel, 50 = datum ∅P (mm), 01 = 1 groove (uses MK-TB 1008).
  • MK-SPZ 45-1PPilot-Bore pulley: 45 = datum ∅P (mm), 1P = 1 groove with ISO H9 pilot bore ready for H7 finish machining.
04

Which Pulley for Which Drive?

Quick engineering triage by mounting method, load class, and speed

Standard industrial motors, fans & pumps needing fast service

Choose the MK-TBP Taper-Bush series paired with MK-TB bushes (1008–5050). Off-the-shelf shaft fit with no re-boring and straightforward field disassembly.

Compact shaft envelope, special keyway, or OEM direct-fit bore

Choose the MK-PBP Pilot-Bore series. Order as H9 pilot blanks or specify finished ISO H7 bores, DIN 6885-1 (JS9) keyways, and set screws directly from your drawing.

Light-to-medium compact drives (HVAC blowers, packaging, light machinery)

Select MK-SPZ (bd = 8.5 mm) or MK-SPA (bd = 11.0 mm) for compact center distances and high power density with narrow SPZ/SPA or cogged XPZ/XPA belts.

Heavy-duty industrial drives (crushers, compressors, heavy conveyors)

Step up to MK-SPB (up to 10 grooves, ∅ 1,250 mm) or MK-SPC (up to 12 grooves, ∅ 1,400 mm) in multi-groove spoked cast-iron construction.

High peripheral speeds (30–35 m/s) or vibration-sensitive fans

Specify 2-plane dynamic balancing to ISO 21940-11 Grade G6.3 on your inquiry. For speeds above 35 m/s, request ductile iron (EN-GJS-400-15) or full-steel machining.

Non-standard groove counts, custom diameters, or OEM drawings

Send your STEP, DXF, or PDF drawing along with belt profile, rpm, and shaft details via our quote form. We supply factory-direct OEM batches with full inspection reports.

Need a quotation, CAD model, or custom-bored pulley?

Send your MISHKIN model code, belt profile, or shaft drawing. Our engineering team responds with sizing verification, lead time, and factory-direct pricing — typically within one working day.